These two wedding rings were created to reinvent the families 9ct and 22ct gold whilst adding some platinum to the gents ring too.
This platinum ring was set with 2 0.4ct diamonds and 1 0.75ct diamonds totalling 1.55ct. Each diamond was GIA certified FVS1.
This ring was made from 4 rings which fitted together precisely. An inner ring made to fit the finger would hold together the 2 white gold and 1 rose/ red gold rings.
The textured ring was the second ring to be made, beaten on a patio stone to give this random texture and the carefully soldered onto the inner ring.
The red/ rose gold ring was the 3 ring to be made and soldered onto the inner white gold ring.
The fine white gold band was the 4th ring to be made and soldered on to complete this chunky band. At this stage, I was able to laser engrave the paw prints and carefully polish each section.
This wedding ring was a joy to create!
Based on a nickname, a bear print theme was decided on. Laser engraving paw prints to appear to be walking around the ring was certainly a memorable ring. Not wanting a polished finished ring either I trialed different textures and decided upon a patio stone beaten finish.
This ring was carved by hand in wax and then cast in 18ct white gold and given a polished finish. The gold is high in palladium and therefore is a very white colour without the need to rhodium plate.
This 18ct white gold wedding ring had a very organic form inspired by a twig to match a floral engagement ring which would sit next to it.
If you would like to discuss a similar piece of jewellery please send me an email via my contact page. Alternatively come and follow one of my social media accounts, leave a comment, like, review and share. I’d love to hear from you.
The ring was designed and made using CAD/CAM. Resin models were made before the ring was cast in 18ct yellow gold. Once the ring had been cast it was then sent to the assay office to be tested and hallmarked. Once the ring was returned it was carefully cleaned polished and the diamonds set.
This 18ct yellow gold wedding ring was designed to incorporate the 5 diamonds that had already been chosen. The ring had to be delicate and fit next to the engagement ring. An unusual setting was decided on, part channel and part claw set. This allowed the ring to keep a delicate style.
If you would like to discuss a similar piece of jewellery please send me an email via my contact page. Alternatively come and follow one of my social media accounts, leave a comment, like, review and share. I’d love to hear from you.
Recent Comments